Stuntskills is on again - Sunday 13th July 2008

General Discussion

Moderators: Paul, mike_rock, JB

Stuntskills is on again - Sunday 13th July 2008

Postby benaylen » Sun May 11, 2008 3:18 pm

I'll update the website shorly but essentially it's the same as last time only payment is required by 13th of June ($120) or chances are it won't go ahead. If enough people pay by June 13th and it does go ahead, payment after the deadline will cost you $150 big ones so get in early.
User avatar
benaylen
Site Admin
 
Posts: 715
Joined: Tue May 31, 2005 10:30 am
Location: Canberra

Postby zx10chick » Sun May 11, 2008 10:46 pm

I will be telling everyone i know that may be interested to book in for the day as they need to make the most of Oran Park before it goes the same way as Amaroo and ends up a big housing estate ! That SUX... It has been great both times I have been so I will definately be promoting it through my job at kawasaki Newcastle ...and maybe the numbers will be up.....I have already got two potential people for the day.... :D
I'd rather be riding
User avatar
zx10chick
 
Posts: 30
Joined: Fri Jan 18, 2008 2:52 pm
Location: Newcastle NSW

Cool!!!!!!!!!!!

Postby Taz666 » Mon May 12, 2008 9:42 am

Who do I need to transfer some funds too?

Had a ball last time and up for it again. Hopefully Posty will have sorted his shoulder by then and we'll have another bike as well.
If you can't race it or take it to bed it ain't worth having
User avatar
Taz666
 
Posts: 33
Joined: Mon Apr 23, 2007 10:40 pm

Postby benaylen » Mon May 12, 2008 10:01 am

Hey Taz,
Just give Corey a buzz on 0438 677 250 and he will give you his bank account details.
Cheers
Ben
User avatar
benaylen
Site Admin
 
Posts: 715
Joined: Tue May 31, 2005 10:30 am
Location: Canberra

Postby JB » Mon May 12, 2008 5:06 pm

see you all there :)
one day i will think of something smart to put here
User avatar
JB
 
Posts: 621
Joined: Sat Mar 25, 2006 3:00 pm
Location: Sydney

Postby j-rad » Tue May 13, 2008 3:27 pm

I've posted it on Netrider, NSW RATS & Canberra riders forums...........
User avatar
j-rad
 
Posts: 389
Joined: Wed Mar 09, 2005 11:15 am
Location: ACT

Postby Bender » Mon May 26, 2008 3:21 pm

j-rad wrote:I've posted it on Netrider, NSW RATS & Canberra riders forums...........


Thanks mate,

Looking forward to SS, its going to be TOPS!
User avatar
Bender
 
Posts: 922
Joined: Wed Jan 05, 2005 7:32 pm
Location: A.C.T. - AUSTRALIA

Postby j-rad » Mon May 26, 2008 5:28 pm

No drama's dude...

did you find the airport listing?
User avatar
j-rad
 
Posts: 389
Joined: Wed Mar 09, 2005 11:15 am
Location: ACT

Postby zx10chick » Mon May 26, 2008 5:36 pm

It would be cool if there was a poster or something to promote the Stuntskills days and maybe some registration forms too and then I could take them to all the bike shops etc in Newcastle and they could be put in the windows and also on noticeboards. I know a lot of the MX people and the guys who organise rally's etc. do that and we often have people coming in asking etc. It would be another way of promoting the day.
:lol:
I'd rather be riding
User avatar
zx10chick
 
Posts: 30
Joined: Fri Jan 18, 2008 2:52 pm
Location: Newcastle NSW

Postby JB » Mon May 26, 2008 7:07 pm

funny you should say that actually. i was told that this was done some time ago and worked very well. but i dont think Corey has the time to do this and i'm not sure of what sort of cost is involved in making up some flyers/posters. but if we could get that happening again, would be great. i can get them in one of the bike stores in the city and parra down here in sydney aswell.
one day i will think of something smart to put here
User avatar
JB
 
Posts: 621
Joined: Sat Mar 25, 2006 3:00 pm
Location: Sydney

Postby benaylen » Mon May 26, 2008 7:55 pm

how 'bout this....

because I'm a top bloke, I can print up a few hundred flyers and mail them to JB, ZX10CHICK, or whoever wants to drop them off at their local bike shop.

I'll even give Corey and Bender a buzz to seek approval.

PM me your addresses and I'll get 'em to you by the end of the week.
User avatar
benaylen
Site Admin
 
Posts: 715
Joined: Tue May 31, 2005 10:30 am
Location: Canberra

Postby benaylen » Tue May 27, 2008 8:45 pm

ok, I got 400 x flyers printed up. there's two to a page and they need to be cut. there's 6 cuts to a page taking about 1 minute to cut two flyers. so there's about 3 hours work to cut 'em.

i've got about 100 done. i'm about to get back into now. :cry:

JB/ZX10CHICK: I got your addresses. I'll mail these out ASAP.
User avatar
benaylen
Site Admin
 
Posts: 715
Joined: Tue May 31, 2005 10:30 am
Location: Canberra

Postby JB » Tue May 27, 2008 9:34 pm

dud you need one of those machines that cut like 10,00000 papers all at once lol. dont stress too much bout cutting all of them dude. i can cut some aswell if you want.
one day i will think of something smart to put here
User avatar
JB
 
Posts: 621
Joined: Sat Mar 25, 2006 3:00 pm
Location: Sydney

Postby benaylen » Tue May 27, 2008 10:30 pm

yeah i'm getting there. got bout 250 done or something.

i got a guilotine but its crappy and only cuts one at a time. it's like a kids toy but it does the job. nice and straight, unlike keyworths bikes :lol:
User avatar
benaylen
Site Admin
 
Posts: 715
Joined: Tue May 31, 2005 10:30 am
Location: Canberra

Postby benaylen » Wed May 28, 2008 12:31 pm

What a freakin' mission. It's done at last. 400 x flyers printed, cut, packed and sent. Half to JB, the other half to ZX10chick.

Bender is all keen for it. I left a voicemail for Corey last night letting him know what's happening as well.
User avatar
benaylen
Site Admin
 
Posts: 715
Joined: Tue May 31, 2005 10:30 am
Location: Canberra

Next

Return to General Chat

Who is online

Users browsing this forum: No registered users and 62 guests

cron